← Back to product catalog
OSYRIS Y 3000 (TOT)
About the product:
Anti-corrosion neat oils. It comply with the ISO Standard 6743/8 (1987) : category L-RL. Long-term, anti-rust protection of machines and metals, tubes, shafts, bars stored in covered areas, away from the elements. Protection of diverse mechanical parts, gears in casing, gearboxes, etc.
Product description:
OSYRIX Y 3000 protect parts by coating them with an oily, non-drying film which is both adherent and durable.
- High spreading ability,
- Minor water-repellent properties,
- Good resistance to humid air and acid atmospheres,
- Prevents corrosion that may be caused by direct handling of parts,
- Recommended protection duration with OSYRIS 3000 is 6 months indoor. This duration depends a lot on the environment of the protected metal, we advise you to test the product on some pieces before validating it technically.
OSYRIX Y 3000 may be applied:
- by spraying,
- by immersion,
- by brush or paintbrush.
If application is done by immersion, parts may be treated even when hot.
• Removal of the protective film :
- by solvent (white spirit, distillates, petrol, etc…)
. wipe away with a cloth soaked in solvent.
. immersion and agitation in two successive baths (5 to 30 minutes depending on the thickness of the film and the temperature).
- by petrol containing 1 % of commercially available emulgator:
. soaking 10 to 30 minutes, draining, washing in hot water, drying.
- Alkaline solutions at 85/95°C:
. immersion and agitation for 5 to 30 minutes, washing in hot water, drying.
. the following may be used for the solution:
- silicate of sodium : 0.5 %
- trisodium phosphate : 1 %
- sodium carbonate : 1 to 2 %
Not sure which product is right for your equipment?
Tell us your technical requirements, and our specialists will recommend optimal solutions to ensure efficient performance while meeting your production needs and budget.
Place an order
