Resin PERMASET 827

The main advantages of PERMASET 827:

• Safe composition: Free of nitrogen and formaldehyde, and the free phenol content is less than 1%.
• Cost-effectiveness: Allows you to use up to 95% of mechanical sand regenerate.
• Versatility: Suitable for steel and iron castings.
• High quality: Provides excellent strength characteristics of the molds.

Physical characteristics:

• Viscosity: about 14 seconds at 20°C (Ford Cup 4).
• Density: about 1.12 g/cm³ at 20°C.
• State: dark transparent liquid with good fluidity.

Note:

Eurotek offers a wide range of resins that can be tailored to the specific needs of your production.

Choose PERMASET 827 for a reliable solution to optimize your casting process and improve product quality.

WARNINGS ABOUT USE:

Permaset 827 Binder contains components that can be hazardous if used improperly. Avoid contact with eyes and skin, and wear protective clothing. Read the appropriate safety data sheet to ensure that the procedures for handling the material are known and understood.

WARNING. Do not mix Permaset 827 directly with acids such as PERMACAT catalysts. These materials should only be mixed together with sand.

STORAGE:
PERMASET 827 binder should be stored at a temperature of +5…+25°C, protected from direct sunlight. Storage at higher or lower temperatures is acceptable, but not recommended. Storage at elevated temperatures significantly reduces the shelf life.

No information available

No information available